Page 6 of 23
Fireplace assembly (cont’d)
Sides and back spacers
Use the drilled holes on each side
and at the back of the fireplace
structure to align and screw into
place the spacers;
The sides spacers provides a 4’’
clearance; (1 each side)
The back spacers provides a 2’’
clearance.
Figure 9 : Sides and back spacers installation
Fan rheostat
The fan rheostat has to be connected to
a 110 VAC electric source;
Run the 14 GA wire through the square
opening located at the back of the
structure;
Connect ground wire to the electrical box.
Figure 10 : Fan electric connections
Comments to this Manuals