Drolet GRIZZLY Service Manual download pdf (Page 4)

Page 3 of 23

INSTALLATION INSTRUCTIONS

Here are the steps to follow while installing your new oil burning fireplace. Pay special attention to the

instructions proposed to you such as clearances. In following the instructions of this manual, you will be

assured of a simple and secure installation.

INSTALLATION IN Canada HAS TO BE IN ACCORDANCE WITH CAN/CSA B-139 : STANDARDS

INSTALLATION CODE FOR OIL-BURNING EQUIPMENT.

IN THE U.S. THE NFPA 31 STANDARD NATIONAL FIRE PROTECTION ASSOCIATION STANDARD FOR

OIL-BURNING EQUIPMENT IS TO APPLY.

The installation shall be made by a qualified person member of the corporation in force in your area.

Installation Procedure

1. Locating the fireplace;

2. Respect clearances;

3. Fireplace assembly;

4. Level the fireplace;

5. Chimney installation;

6. Connect the oil line;

7. Preliminary test;

8. Inserting the fireplace;

9. Framing the fireplace.

Locating the fireplace

Some advices :

• Choose the room where the installation will benefit everyone;

• Favour a central area so that the heat will spread-out evenly in your home;

• Chimney installation should be as straight as possible.

Many configurations are possible, the most frequent ones are illustrated bellow. (Figure 2 and 3)

Figure 2 : Corner installation Figure 3 : Wall installation

1 2 3 4 5 6 7 8 9 ... 23 24

No comments

Drolet GRIZZLY Service Manual Page 4